FAQ
No! Click LVT simply slots together without any adhesive or glue. However, you may need adhesives to install Click LVT on Treads, Risers and Ramps.
Click LVT can be installed on most of the existing subfloors and underlayment:
√ Click LVT can confidently be installed on virtually any wood underlayment.
√ Concrete subfloors can be also get Click LVT installation but these subfloors must have moisture levels 8 lbs or less before, during and after installation.
Keep in mind that Carpet, laminate, floating floors systems and cushioned vinyl flooring are not good underlayment for Click LVT installation.
Yes, but these radiant heat systems must be approved by the manufacturer for such use. Also, the temperature of the subfloor must also not exceed 29°C.
Click LVT is cheaper and easier to install as it does not require adhesive to glue it down to the subfloor as in the case of Dry Back LVT.
Underlay provides flooring to the bed and act as a barrier between the Click LVT floor and the subfloor and provides protection against moisture. Also, it helps reduce the noise from 4dB to 16dB. In addition, underlay also makes the floor more comfortable to feet by adding softness to it.
If the concrete floor is levelled and clean without any bumps, underlay is not a necessity. However, an underlay is worth considering because of its capability to add softness, warmth and noise reduction to the floor. However, if there are any moisture issues, an underlay must be used to serve as a barrier between the subfloor and Click LVT.
Consult Your ZOMEI Flooring Experts
Send us your needs for your business, we have professional service team to answer you !
